Minelab Gold Monster 1000 with 5″ Coil and Free Profind 40 Pinpointer

$1,069.00

The GOLD MONSTER 1000 boasts fully automated functionality. If you’re looking for super sensitive gold performance at a great price, then this is the detector you’ve been waiting for!

Category:

The GOLD MONSTER 1000 boasts fully automated functionality. If you’re looking for super sensitive gold performance at a great price, then this is the detector you’ve been waiting for! Traditionally, optimizing detector performance meant compromising between frequency and sensitivity. Lower frequencies excel at detecting larger gold nuggets, while higher frequencies excel at detecting smaller ones.

When comparing detectors, the detector’s ability to find small gold nuggets of a certain size, at a maximum possible depth varies. Most detectors will find a very large nugget just beneath the surface, however a detector’s sensitivity to gold determines how many smaller nuggets will ultimately be recovered in difficult (noisy) ground at greater depths.

An 18 kHz detector will normally have a depth advantage on nuggets ≥ 1.0g over a basic mid-frequency detector, and a 71 kHz detector will have a depth advantage on nuggets ≤ 0.1g. The advanced GOLD MONSTER 1000 uses an intermediate 45 kHz frequency AND a high speed 24-bit signal processor. This primary combination greatly boosts sensitivity to gold beyond that of other single frequency VLF detectors over a wide range of nugget sizes, without introducing excess noise and false signals.

The GOLD MONSTER 1000 also boasts enhanced ferrous/non-ferrous discrimination capabilities and handles conductive (salty) soils more effectively compared to detectors with higher frequencies. This makes it the ideal choice for maximizing your gold recovery!

Specifications

  • Key Technology: Ultra-wide dynamic range 45kHz VLF
  • Detect Modes: Gold (Iron reject), Deep All-Metal
  • Discrimination: Gold Chance Indicator (high/low)
  • Ground Balance: Automatic (Easy-Trak)
  • Noise Cancel: Automatic (On start-up)
  • Sensitivity Adjust: Manual (1–10), Auto (11), Auto+ (12)
  • Volume Adjust: Manual 1–6
  • Visual Display: Monochrome LCD
  • Detector Length: 1382mm–944mm (54.4″–37.2″)
  • Detector Weight: 1.33kg (2.94lbs) (excluding battery)
  • Audio Output: Internal speaker or headphones 3.5mm (1/8″)
  • Standard Coil: GM 05 (5″ Double‑D)
  • Waterproof/Splashproof: Coils waterproof to 1m (3′), Control box rain/splash-proof
  • Battery options: 2 x Li-Ion (included), 8 × AA Batteries (not included)
  • Warranty: 2 years control box & coil